Varenummer: | 106-329 |
Varekode: | TCRGUNB |
Vægt: | 127.5g |
Application |
• Is a applied between components that may overheat and heat sinks to ensure rapid heat transfer. • Combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound. |
![]() |
TCER75S, TCOR75S |
![]() |
Features |
• Single Part, low odour RTV TCOR75S: solvent free • High thermal conductivity • Wide range of operating temperatures -50...+230°C • Remains flexible and elastic at high temperatures • Good chemical resistance • Good electrical insulation characteristics • Moisture cure TCER75S: releasing ethanoll upon cure TCOR75S: releasing oxime upon cure |
![]() |
Technical Specifications |
![]() |
|
Colour: |
White |
Viskosity |
|
TCER75S: |
80...90Pa s |
TCOR75S: |
Non Slump Paste |
Thermal Conductivity |
|
TCER75S: |
1,8W/mK |
TCOR75S: |
1,7W/mK |
Tensile Strength: |
2MPa |
Elongation at Break: |
300% |
Temperature Range (Short Term): |
-50...+200°C (250°C) |
Storage Temperature: |
+10...+25°C |
Specific Gravity/Density: |
2,3g/ml |
Dielectric Strength: |
>8kV/mm |
Electrical Insulation: |
1x1014W/cm |
Skin Forming Rate: |
10...15min. |
Cure Time (20°C): |
24h |
![]() |
Note |
• Please note the information concerning limited shipping of dangerous goods. |
![]() |
TCRGUNB |
Dispensing Gun for 75ml Sytinge |
![]() |
Features |
• This is a very easy and accurate dispensing method for TCER, TCOT and TCR. |
![]() |
Terms of Delivery |
Minimum order quantity: 1 PKU = 1 piece Form of delivery: Syringe Articles in bold print in stock, other articles are available on request, delivery time approx. 6 weeks. |
![]() |
Manufacturer |
![]() |
http://www.electrolube.com |
![]() |