A weatherproof camera housing suitable for all Li-Lin cameras and lens combinations, the aluminum extrusion and rubber sealed plastic end caps offer a good level of protection for external applications. The housing is opened by removing the rear end cap then sliding the top section and sunshield off, exposing the camera mounting tray and terminal strip. The camera is fixed in place with the 1/4" UNC bolt provided it can be adjusted to provide the correct camera position and locked in place. Cable egress is via a gland fitted into the base. The aluminum sunshield can be adjusted to shield the lens. The housing is finished in brushed aluminum with grey end caps and a tempered glass front viewing window. For wall mounting use the PIH-5004 bracket, the PIH-5040 is also suitable for use with Pan & Tilt Heads and can accommodate most compact zoom lenses. As there is no heater facility available, this housing may be unsuitable for some outdoor applications.