JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Power-stik 20A 4-pol chassis CLIFFCON

Varenummer:121-145
Varekode:AEBU41GL
Lagervare!
Henter lager-information...
Henter lager-information fra leverandører...
Internet-pris
Inkl. moms
Kr. 39,00
v/10Kr. 29,00

AEBU41GL Power-stik 20A 4-pol chassis CLIFFCON

NB! PASSER IKKE SAMMEN MED ANDRE FABRIKATER

CliffCon® 4 Pole Power Connectors  FCR2068

Our range of 4 pole Cliffcon®s are available in straight or 90° versions and have now been designated low voltage (blue) and high voltage (red).

CliffCon® Blue (LV) is for uses under 120V AC such as speakers, amplifiers, battery chargers and vehicle use. Maximum current at pole is 20A, (30A).

CliffCon® Red (HV) is for uses up to 250V AC such as lighting and power connections. Maximum current at pole is 20A, (30A).

Only plugs and sockets of the same colour are compatible, so red plugs cannot be plugged into blue sockets and vice versa. This allows the use of both kinds of connector on the same equipment with no chance of mismatching the connections. Convenient Faston, screw and solder connections. Chassis connectors are air-tight and fit the same cut-outs as our XLR connectors. Our original black version remains available. However, we suggest users change to the HV and LV versions for new designs.

Electrical Specification

  • Rated Current: 4 pin 20 A RMS @ 80°C, 30 A RMS @ 20°C (5% usage).
  • Rated Voltage: Blue (LV) 120 V;  Red (HV) 250 V AC maximum, (connections electrically identical, only the designation is LV and HV).
  • Contact Resistance New: < 3 mΩ.
  • Capacitance between Terminals: < 1.5 pf.
  • Insulation Resistance: > 20 MΩ @ 4000 V.
  • Inrush Current: > 30 A / 20 mS.
  • Operating Voltage: -20 °C to +80 °C.
  • Recommended Wiring: 1+, 1- CH A (L) 2+, 2- CH B (R) pin 1 designated for earth (+ inphase, - ground).
  • Contacts: gold plated.
  • Maximum Wire Size: 6 mm² / 10 AWG (solid); 4 mm² / 12 AWG (stranded).