JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

3-Color RGB SMD LED Module

Varenummer:129-687
Varekode:ARDU0021
Lagervare!
Henter lager-information...
Henter lager-information fra leverandører...
Internet-pris
Inkl. moms
Kr. 25,00
Kr. 49,00
v/10Kr. 20,00

ARDU0021 3-Color RGB SMD LED Module

Details

- 3-color LED Module
- With red, green and blue output
- Great for DIY project

 

THIS MODULE DOES NOT INCLUDE CURRENT LIMITING RESISTORS. This allows the module to be used with a range of supply voltages but you must drive the LED's via an appropriate current limiting resistor otherwise damage to the LED's will occur. We will be adding an example of how to correctly drive the LED's to this page soon.

Please note that the current version of this module has a screen print error showing wrong colour order for the pinout. Please see the table below for the correct pinout.

 

Red LED Vf : 2V (approx)
Green LED Vf : 3V (approx)
Blue LED Vf : 3V (approx)

Red LED Max Ifmax : 20mA
Green LED Max Ifmax : 20mA
Blue LED Max Ifmax : 20mA

 

PINOUT
PIN DESCRIPTION
1 GREEN LED
2 RED LED
3 BLUE LED
4 GND

 

 

EXAMPLE CODE


ARD_RGB_LED_MODULE_HCARDU0021_Example.pde

 

/* FILE:    ARD_RGB_LED_MODULE_HCARDU0021_Example.pde
   DATE:    04/07/12
   VERSION: 0.1

This is a simple example of how to use the RGB LED module (ARDU0021). The module has 3 separate LED's (Red, Green & Blue) which Can be individually driven by applying a voltage to the appropriate module pin. This example uses the standard Arduino analogWrite (PWM) function to cycle through the full range of colours this module is capable of producing. Please be aware that this module does NOT include current limiting resistors and therefore you should not connect this module directly to the Arduino DIO pins.
SENSOR PINOUT:
PIN 1: GREEN LED +Ve PIN 2: RED LED +Ve PIN 3: BLUE LED +Ve PIN 4: GND
You may copy, alter and reuse this code in any way you like but please leave reference to HobbyComponents.com in your comments if you redistribute this code. */

#define BLUE_LED_DIO 11 /* Select the DIO for driving the BLUE LED */
#define RED_LED_DIO 9 /* Select the DIO for driving the RED LED */
#define GREEN_LED_DIO 10 /* Select the DIO for driving the GREEN LED */
/* Initialise serial and DIO */ void setup()
{
/* Configure the DIO pins used by the analogWrite PWM function */
pinMode(BLUE_LED_DIO, OUTPUT);
pinMode(RED_LED_DIO, OUTPUT);
pinMode(GREEN_LED_DIO, OUTPUT);
}
/* Main program loop */ void loop()
{
int k;

/* Slowly reduce the red LED's intensity and at the same time increase the green LED's intensity */
for (k = 0; k <=255; k++)
{
analogWrite(RED_LED_DIO,255 - k);
analogWrite(GREEN_LED_DIO, k);
delay(10);
}

/* Slowly reduce the green LED's intensity and at the same time increase the blue LED's intensity */
for (k = 0; k <=255; k++)
{
analogWrite(GREEN_LED_DIO,255 - k);
analogWrite(BLUE_LED_DIO, k);
delay(10);
}

/* Slowly reduce the blue LED's intensity and at the same time increase the red LED's intensity */
for (k = 0; k <=255; k++)
{
analogWrite(BLUE_LED_DIO,255 - k);
analogWrite(RED_LED_DIO, k);
delay(10);
}
}
Varer i kategorien "Byggesæt og moduler" skal som udgangspunkt betragtes som komponenter til hobbybrug, og ikke et færdigt produkt! - de er dermed ikke CE-mærkede.