JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

PR ELECTRONICS, Isolation Amplifier

Henter lager-information...
Henter lager-information fra leverandører...
Inkl. moms:
Kr. 2.400,00

Isolation amplifier

Galvanically separated input, output, and supply

  • Bipolar current / voltage input
  • Signal conversion
  • Current and voltage output
  • 24 VDC supply or universally supplied
  • Applicable in PELV/SELV circuits
  • Advanced features

    • Programmable input and output ranges using internal DIP-switches.
    • Front panel fine adjustment of 0 and 100% values for special ranges.


    • Galvanic separation of analog signals.
    • Measurement of floating signals.

    Technical characteristics

    • Analog signal conditioning with microprocessor based gain and zero offset with a fast response time of less than 25 ms.
    • Signal conversion within the ranges: -250...+250 VDC or -50...+50 mA on the input and 0...10 (20) VDC and 0...20 mA on the output.
    • Galvanically separated between input, supply, and output.
    • 2-wire transmitter supply and a reference voltage of 2.5 VDC, max. 15 mA for short circuit-protected supply of potentiometers.
    • Buffered voltage output 0...20 V, 10 mA.
    • The output can be ordered for standard 0/4...20 mA, and 0/1...5mA or special currents and selectable voltages within the signal range 0...1 VDC or and ranges 0...10 VDC.
    • Output signal reversal.
    • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
    • Environmental Conditions

      Specifications range -20°C to +60°C
      Calibration temperature 20...28°C
      Relative humidity < 95% RH (non-cond.)
      Protection degree IP50

      Mechanical specifications

      Dimensions (HxWxD) 80.5 x 35.5 x 84.5 mm (D is without pins)
      Weight DC / universally supplied 125 g / 165 g

      Common specifications

      Supply voltage 19.2...31.2 VDC
      Supply voltage, universal 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC
      Max. power consumption ≤ 2.4 W (2284--D) ≤ 2.5 W (2284--P)
      Isolation voltage, test / working 3.75 kVAC / 250 VAC
      Signal / noise ratio Min. 60 dB
      Response time (0...90%) < 25 ms
      Effect of supply voltage change < 0.005% of span / VDC
      2-wire transmitter supply (pin 7...5) 19...28 VDC / 20...0 mA
      Auxiliary voltages: Reference voltage 2.5 VDC ±0.5% / 15 mA
      Temperature coefficient < ±0.01% of span / °C
      Linearity error < 0.1% of span
      EMC immunity influence < ±0.5% of span

      Input specifications

      Max. offset 50% of max. value
      Current input: Measurement range -50...+50 mADC
      Min. measurement range (span), current input 0.53 mADC
      Input resistance, current input Nom. 50 Ω
      Voltage input: Measurement range -250...+250 VDC
      Min. measurement range (span), voltage input 27 mVDC
      Input resistance, voltage input >1 MΩ...<10 MΩ

      Output specifications

      Max. offset 20% of max. value
      Current output: Signal range 0...20 mA
      Min. signal range 4 mA
      Load (max.) 20 mA/1000 Ω/20 VDC
      Load stability, current output ≤0.01% of span/100 Ω
      Current limit 23...28 mA
      Voltage output through internal shunt See manual for details


      EMC EN 61326-1
      LVD EN 61010-1
      PELV/SELV IEC 364-4-41 and EN 60742
      GOST R Yes
Del produkt
Del via E-Mail
Del på Facebook Del på Twitter
Kunder der har købt dette produkt har også købt