Arduino compatible R3 Revision 3 Uno

The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, a...

Arduino compatible R3 Revision 3 Uno

The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

The Uno revision 3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter.

Revision 3 of the board has the following new features:

 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin; An IOREF pin that will allow future shields to adapt to the correct IO voltage and second not connected pin that is reserved for future purposes.

 Stronger RESET circuit.
 Atmega 16U2 replace the 8U2.

Please note that this item is Arduino compatible. Arduino is an open standard and this board has been built exactly to the Arduino open source reference design. It also contains the same boot loader and is therefore identical in design, build and software to an original board. The only significant difference is the price. All our Arduino boards are built and tested at the same factory and have an exceptionally high reliablity rate. Of course, if you are not happy with your order you can return it back to us for any reason within 14 days of receiving it.

Arduino compatible IIC/I2C/TWI YwRobot Serial LCD 1602 Module

Enclosure for Arduino Development Board / Project

Description

This Arduino enclosure can be used for various Arduino boards including Uno, Mega, Duemilanove, Leonardo, etc. Simply align the holes to the different internal mounting holes according to your Arduino board. This is one of the first enclosures which can be adapted for different Arduino boards. This is a great case for your Arduino project as it allows for a 16x2 LCD module to be inserted too.

Features

Made of ABS plastic

Built to fit various Arduino development boards and can even hold a 16x02 LCD (the hole for this is precut and can be seen in the images)

Pop out plates for GPS, buttons, sensors, switches, etc. The almost clear ABS means that you can see directly into the case without having to remove your development board.

Dimensions

128mm (L) x 90mm (W) x 34mm (H)

The boar din this kit is derived from the Arduino(TM) reference design which was released under the Creative Commons Attribution Share-Alike license.

You can see the license here:

https://creativecommons.org/licenses/by-sa/3.0/legalcode

Technical support for any product sold by Hobby Components should be directed to Hobby Components. We have no affiliation with Arduino.