Low Power Quad Comparator DIL-14

The Fujitsu is a Quad Comparator which consists of four independent channels. The MB4204 is designed to operate form either a single power or dual power supplies over a wide range of voltages. The input characteristics is equivalent of current industry standard comparator. Even though operated from a single power supply, the MB4204 is suitably designed to compare multiple signals in parallel and to be operated with battery because its input common mode voltage range includes ground potential and it requires low power supply current. The MB4204 can be high density mounted because it integrates 4 circuits on a chip in DIP/FPT-14-pin package. The MB4204 is pin compatible with LM339.

Wide power supply voltage range: to +36V Wide input common mode range: 0 to (VCC 1.5) V Low power supply current: 0.8 mA typ. Low input offset voltage: 2 mV typ. Low input bias current: 25 nA typ. Open Collectors Output allow to wired-OR Connection Package --14-pin Plastic DIP Package (Suffix: ­P) --14-pin Plastic FPT Package (Suffix: ­PF)

This device contains cirduitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.

Rating Power Supply Voltage Power Dissipation Differential Input Voltage Common Mode Input Voltage Output Short Circuit Duration Operating Temperature Storage Temperature Symbol VCC PD VID VI TA TSTG Value to +36 Infinite to +125 (TA = 25°C) Unit V °C

NOTE: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

OUT­C OUT­D GND +IN­D ­IN­D +IN­C ­IN­C