Relay DPDT 2A 12V 960R G5V-2-H1 12VDC

Lagervare!

Henter lager-information...

Henter lager-information fra leverandører...

G5V-2 Low Signal Relay

General-purpose DIL terminal layout.
Wide switching power of 10 µA to 2 A.
Fully-sealed type Relays standardized with bifurcated crossbar contacts. Highly reliable in addition to its high environment resistance.
Conforms to FCC Part 68 (impulse withstand voltage of 1,500 V for 10 x 160 νs between coil and contacts and between contacts of the same polarity).
High dielectric strength at 1,000 VAC between coil and contacts, and 750 VAC between contacts of the same polarity.
UL and CSA standard approved.

Note:	When ordering, add the rated coil voltage to the model number.

	However, the notation of the coil voltage on the product case as well as on the packing will be marked as □□ VDC.

Coil Ratings
Standard Models

High Sensitivity Models

Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
	2.	Operating characteristics are measured at a coil temperature of 23ºC.
	3	The maximum voltage is the highest voltage that can be imposed on the relay coil.

Contact Ratings

Characteristics

Item Classification		Standard	High sensitivity
Contact resistance *1		50 mΩ max.	100 mΩ max.
Operate time		7 ms max.
Release time		3 ms max.
Insulation resistance *2		1,000 MΩ min. (at 500 VDC)
Dielectric strength	Between coil and contacts	1,000 VAC, 50/60 Hz for 1 min
	Between contacts of the same polarity	750 VAC, 50/60 Hz for 1 min	500 VAC, 50/60 Hz for 1 min
	Between contacts of different polarity	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance	Destruction	1,000 m/s2
Shock resistance	Malfunction	200 m/s2	100 m/s2
Durability	Mechanical	15,000,000 operations min. (at 36,000 operations/hr)
Durability	Electrical	100,000 operations min. (at 1,800 operations/hr)	AC: 100,000 operations min., DC: 300,000 operations min. (at 1,800 operations/hr)
Failure rate (P level) (reference value) *3		10 νA at 10 m VDC
Ambient operating temperature		-25°C to 65°C (with no icing or condensation)	-25°C to 70°C (with no icing or condensation)
Ambient operating humidity		5% to 85%
Weight		Approx. 5 g

NOTE:		The above values are initial values.
	1.	The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
	2.	The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.
	3.	This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.

Produktfiler