JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Termostat, +90 to +110 °C, SPDT - enpolet skifte, 16A

Henter lager-information...
Henter lager-information fra leverandører...
Inkl. moms:
Kr. 299,00

Adjustable Capillary & Safety Limit Thermostats


Altecnic safety limit thermostat is designed for panel or bracket mounting in a central
boiler plant room in a commercial or public building. They are intended to measure and
limit the maximum temperature in calorifiers, hot water cylinders and other similar
appliances by measuring the surface temperature or on adjacent pipework. When the
upper switching temperature 90 to 110°C has been reached the thermostat breaks the
electrical circuit causing a motorised control valve to close and isolate the primary hot
water supply to the appliance. The safety limit thermostat must be manually reset to
restore the electrical circuit. The black protective cover is attached to the thermostat by
an internal M10 x 1 thread. Allow the system to cool before unscrewing the black cover
and depressing the reset button. The thermostats require two M4 x 6 long screws to
mount the thermostat to the panel or bracket - not supplied. The M10 nut also
helps secure the thermostat to the panel or bracket.
Technical Specification
Electricity supply: 15(2.5)A / 250V AC
Switching point with thermostat at temperature: 20 ̊C
Marked: Sensing element: Liquid filled
Capillary and sensing element material: Copper

Capillary Thermostats which operate from a remote bulb linked with a 1m capillary, changeover contacts (SPDT) enable use with both heating and cooling loads. Supplied with chrome mounting bezel and knob
0 to 300 °C Thermostat also has an OFF position
Safety Limit Thermostat with manual reset and positive cut-off activated when capillary breaks (SPDT contact)
Suitable for domestic/commercial applications

Capillary length 1000 mm
Min. capillary bend radius 5mm
Temp. rate of change 1°K/min
Contact rating (SPDT) 250 Vac 16 A
Body dimensions W x L x H 32 x 44 x 36 mm
Overall size (excluding capillary) 32 x 44 x 60 mm

Industrial Thermostats

Not what you’re looking for? Select the attributes you require, then click the button below
  Minimum Temperature +90°C
  Maximum Temperature +110°C
  Switch Configuration SPDT
  Contact Rating 16 A
  Contact Voltage Rating 250 V ac
Del produkt
Del via E-Mail
Del på Facebook Del på Twitter
Kunder der har købt dette produkt har også købt