Transformer 300VA 1x230V 2x12V

This transformer is CSA- and UL-Recognized, File No. E115159, according to following standards:
UL1950 & CAN/CSA C22.2 No. 950-95
Standard for safety for Information Technology Equipment, including Electrical
Business Equipment.
The construction of this transformer also fulfill the requirements according to IEC 601.1,
EN 61558-1, EN 60 950, EN 60 065, UL 2601.1, UL 6500, UL 1411.
Core.
The core is tapewound with cold-rolled grainoriented silicon steel.
mm 
Core Protection.
The core is insulated with min. four layers of 0,05mm thick Polyesterfilm.
UL-Approved under Guide QMFZ2. Flame Class UL 94VTM-2. Approved for 130°C.
Copper Wire.
Polyesterimid enamelled copper wire, according to IEC 317-13.
Approved for min. 180°C.
Primary Termination.
Stranded wire:
UL-Approved under Guide AVLV2, Style 3266. Approved for 300V and 125°C.
Plus an extra insulation tube. UL-Approved under Guide YDPU2. Approved for 105°C.
Secondary Termination.
The wire ends are insulated with insulation tubes.
UL-Approved under Guide YDPU2. Approved for 300V and 105°C.
Insulation Primary - Secondary.
The insulation between the primary and the secondary consists of min. six layers of
0,05mm thick Polyester film (total thickness min. 0,3mm).
UL-Approved under Guide QMFZ2. Flame Class UL 94VTM-2. Approved for 130°C.
Two of these layers withstands together 4000Vac for one minute. The creep distance
exceeds 8mm and the insulation resistanceis more than 5000 Megohm.

Ø165x65mm