USB Mini-B Connector Breakout Board
| Varenummer: | 146-681 |
| Varekode: | POLOLU-2593 |
| Vægt: | 2.8g |
This simple board breaks out all five pins of a USB Mini-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1″ connectors.
This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1″-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with perfboards, solderless breadboards, and 0.1″ connectors.
This tiny unit measures only 0.52″ × 0.85″ (0.55″ × 0.85″ including its USB Mini-B connector) and has four 0.086″ diameter mounting holes for #2 or M2 screws.
- Afbrydere og omskiftere
- Alarm og overvågning
- Audio
- Batterier + tilbehør
- Belysning
- Bokse, kasser, skabe
- Byggesæt og moduler
- Computerudstyr
- Diverse
- El-materiel (installation)
- Foto
- Højttalere + tilbehør
- Hjemmet
- Kabler, stik og adaptere
- Komponenter
- Loddeudstyr og loddetin
- Luplamper + tilbehør
- Måleinstrumenter
- Mekanik
- Printfremstilling
- Sensorer
- Smartphone- og tablet-tilbehør
- Spray, tape, lim m.v.
- Strømforsyninger Transformatorer
- TV- og radio-tilbehør/Antenne
- Værktøj
- Ventilatorer
