Varenummer: | 149-584 |
Varekode: | BREAKOUT BOARD FOR MICROSD CARD |
Vægt: | 3.1g |
MicroSD memory cards (originally known as TransFlash) provide a compact and inexpensive way to add gigabytes of non-volatile storage to a project. All SD cards support communication over the SPI (Serial Peripheral Interface) bus, making it straightforward to interface one of these cards with an SPI-capable microcontroller.
This carrier board makes it easy to connect to a microSD card by breaking out all of the contacts from a microSD card socket into two rows of 0.1″-spaced pins. The board measures only 0.8″ × 0.7″, and a set of breakaway 0.1″ male header strips (one 1×7 and one 1×4) is included, which can be soldered in to use the board with breadboards, perfboards, or 0.1″ female connectors. (The headers might ship as a single 1×11 piece that can be broken in two).
The following tables describe the function of each pin on the breakout board in SPI and SD mode:
Pin | Description | ||
---|---|---|---|
GND (VSS) |
Power and logic ground | ||
VDD | Supply voltage (2.7 V to 3.6 V for standard microSD cards) | ||
CD | Card detect. When a card is inserted, this pin is floating; when no card is inserted, it is shorted to ground. A pull-up resistor can be used to pull the line high when a card is present. | ||
SPI mode | SD mode | ||
Pin | Description | Pin | Description |
DI | Data in (MOSI) | CMD | Command/response |
DO | Data out (MISO) | DAT0 | Data (bit 0) |
SCLK | Clock | CLK | Clock |
CS | Chip select (active low) | DAT3 | Data (bit 3) |
— IRQ |
Reserved Interrupt (active low; SDIO devices only) |
DAT1 IRQ |
Data (bit 1) Interrupt (active low; SDIO devices only) |
— | Reserved | DAT2 | Data (bit 2) |
Varer i kategorien "Byggesæt og moduler" skal som udgangspunkt betragtes som komponenter til hobbybrug, og ikke et færdigt produkt! - de er dermed ikke CE-mærkede.